page_banner1

Horizontal Storage Tank Lined With PTFE Sheet For Chemical Processing Made In China

short description:

Temperature classification: high quality high temperature pipe
MPa Classification :-0.09 MPa to 2.5 MPa
Material: PTFE,CS/SS STEEL
Standard :ASTM, GB, DIN,JIS
Diameter: customized sizes
Material: PTFE,CS/SS STEEL


Product Detail

Product Tags

Product Description

 Advantages And Characteristics In The Design Of Steel Lined Tetrafluoride Pipe Fittings
This RANA is made of high performance ptfe powder, throgh tube is pushed (squeezed) and molded, chemical tube surface is treated, and then discharged into seamless steel tube (outer diameter of liner compared to inner diameter of steel tube 1-1.5 mm) expansion tight lining.
The product has three characteristics:
1. Seamless pipe, high performance impact resistance, anti aging.
2. Axial tensile strength is very good.
3. The surface of the product is smooth, and each special-shaped steel piece can be lined.

Basic Info

Model NO.
FF-9979
Connection Type
Seamless
Specification
various
Origin
Jiangsu China
Production Capacity
5000000
Cross-Section Shape
Round
Transport Package
Welded Steel Shelf
Trademark
Yihao
HS Code
3904610000

Product Parameters

Teel Pipe Lined PTFE for Pipe Fittings
Steel pipes are lined with teflon fittings
Brand: Yihao
Material: PTFE,CS/SS STEEL
DN: 3/4 "- DN500, 3/4" ~ 20"
Operating temperature :-20ºC ~ 180ºC
Working pressure :0 ~ 2.5mpa
Flange: according to HG/T20592-2009)
** Can be selected with HG, GB, JB, ANSI, JIS, BS, DIN and other standards, can be selected with fixed flanges, flexible flanges.
Medium: can support the transport of arbitrary concentration of strong acid, strong alkali, organic solvent, strong oxidant, toxic and other corrosive media.

Note:

1) When the diameter of the product DN≥500mm, it belongs to the equipment class.
2) If it is used under negative pressure, the demand should be explained to us when ordering, and then lining according to negative pressure resistance process.
3) If there is no special requirement for flanges, please refer to the appendix as stipulated in HG20592-2009.
4) See table for common pipe fitting parameters. Other non-standard parts, such as eccentric reducer, reducing elbow, etc., we can be customized according to user requirements, processing.
5) The pressure of steel-lined F4 and F46 glass cylinder mirrors is < 0.3mpa, and the pressure in working condition is ≥ 0.3mpa. Customers suggest using steel-lined PTFE four-way mirrors.
6) Steel lined PTFE molding parts DN≥200, the use of temperature <120℃, the use of pressure -0.02-1.6mpa, can be specially designed according to customer conditions.


  • Previous:
  • Next: